Siemens SINUMERIK 840D Operator's Manual page 263

7
03.04
Start
OK
Stop
Start
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
When you press the "Start" softkey, data are read in and stored in the
specified path.
Path/workpiece from archive file
To archive files using the "Data out" function, the directory paths from
which the files were read are stored with the other data in archiving
format.
The stored paths are interpreted on import and the files are copied
back to the directories from which they were backed up (NC default
MPF.DIR).
In punched tape format, the ;$path = statement is applied.
Path/workpiece from archive file
Irrespective of the archived path name, all files are stored in the
directory selected beforehand with the "Direction keys".
Readin to the clipboard
All archived data are stored in the clipboard regardless of the archive
path name.
The data are read in. The message "Transmission in progress" is
displayed.
The display shows "Path/workpiece", "File" and the number of
transmitted "Bytes".
You can interrupt data import at any time by pressing the "Stop" key.
If you press softkey "Start" again, the data import recommences from
the beginning.
Services Operating Area
7.5 Main services screen
7
7-263