Siemens SINUMERIK 840D Operator's Manual page 7

0
03.04
Structure of the
descriptions
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
Wherever sensible and possible, all functions and operating options
have been described using the same internal structure. By structuring
the explanations in different information levels, we have made it
possible for users to specifically access the required information.
Explanation of symbols
Function
This theoretical part serves as a learning document, particularly for
those who are new to the world of NC applications. Important
information about understanding operating functions is offered to
users at this point.
You should work through the manual at least once to get an overview
of the operational scope and performance capability of your
SINUMERIK control.
Operating sequence
This point shows the sequence of key operations which need to be
executed. Any inputs or additional information required in the
individual operating steps are described next to the pictures of the
keys.
Notes
This symbol is always displayed in this document to draw your
attention to an important item of information in a more complex
description.
Machine manufacturer
For safety reasons some functions are locked against unauthorized
access. The machine manufacturer can influence or change the
described functional behavior. Always refer to the information and
specifications provided by the machine manufacturer.
Further information
For safety reasons some functions are locked against unauthorized
access. The machine manufacturer can influence or change the
described functional behavior. Always refer to the information and
specifications provided by the machine manufacturer.
Reference notes
You will find this symbol wherever further information on a particular
topic can be looked up in specialist literature.
A complete list of available literature is included in the Appendix of
this Operator's Guide.
0
Preface
Intended use
vii