Display Version Data - Siemens SINUMERIK 840D Operator's Manual

8
Diagnosis Operating Area
8.3 Service display

8.3.6 Display version data

Service
displays
Version
NCU
Version
HMI
Version
Compile
cycles
Cycles
version
Save
versions
8-288
Function
You can read the HMI and the NCU version in the version window.
The HMI Embedded is also displayed in the run-up screen as well as
during installation.
The complete product identifier (e.g. HMI-Embedded) also appears in
front of the 8 digit version identifier.
In the "Services" operating area, the version data can be read from
the (System, File "VERSION_SYF")directory via the RS-232 C
interface or via one of the logical drives (NC-card).
Operating sequence
Press "Service displays" softkey.
The horizontal softkey bars change.
Open the "Version" window. More areas are available and you can
see the version data via the following horizontal softkeys:
Version display of the NCU
Version display of the HMI Embedded.
Only if option selected, version display for compile cycles.
see Chapter: "Displaying Loadable Compile Cycles"
Version display for cycles
Use the "Page" keys to scroll up and down.
Data are saved and can be read out in the "Services" operating area.
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
8
03.04
 Siemens AG, 2004. All rights reserved