Restoring The Original Status Via Nc Card - Siemens SINUMERIK 840D Operator's Manual

7
03.04

7.5.10 Restoring the original status via NC card

Various archives
can be selected and
generated
Original
state
!
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
Function
The free memory on the NC card (PCMCIA card) can be used to store
a start-up archive.
The archive can be loaded onto the NC card with SINUCOPY-FFS
(on an external PG/PC).
The series machine start-up archive can be stored directly with the
name "Original" in HMI Embedded on the NC card (see Series
machine start-up - creating a file).
Operating sequence
Precondition:
The start-up archive with the name _N_ORIGINAL_ARC is located on
the NC card (in the directory _N_NC_CARD_DIR\_N_ARC_DIR).
Select the "ETC key" in the main Services screen and
then the "Original state" softkey.
When you press the softkey, the protocol window appears with the
query: "Series start-up archive: Perform series start-up?". After
confirmation, the data are imported.
Caution
All user-specific NC data (and PLC data depending on contents) will
be deleted and replaced by the data from the archive.
Further information
Users with access authorization to level 3 and higher can access this
softkey. It is displayed only if archive _N_ORIGINAL_ARC is stored
on the NC card.
Services Operating Area
7.5 Main services screen
7
7-275