2
Operator Components/Operating Sequences
2.1 Operator panels
2.1
Operator panels
OP 010 Operator Panel
A Display
B Alphanumeric keypad
Correction/cursor keys
1 Machine area key
2 Recall (Return)
3 Softkey bar (horizontal)
4 ETC key
(menu extension)
5 Area switchover key
6 Softkey bar (vertical)
2-26
The recommended hardware base for HMI Embedded is a
SINUMERIK 840D/810D with PCU 20 or PCU 50.
You can use one of the following operator panels for the PCU:
OP 010
OP 010C
OP 010S with OP 032S full CNC keyboard
OP 012
OP 015 with 19'' full CNC keyboard
TP 012 and TP 015A (only with customer-specific software)
All keys are described in the following sections.
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
2
03.04
Siemens AG, 2004. All rights reserved