Find Cutting Edge; Delete Cutting Edge - Siemens SINUMERIK 840D Operator's Manual

5
03.04

5.2.8 Find cutting edge

Overview
Go to

5.2.9 Delete cutting edge

D No. D No.
+ -
Delete
Delete tool
edge
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
Function
You can use one of two search methods:
1. Overview: List of existing tools with their edges is displayed.
2. Go to: Opens a window in which you can enter the T or D number
you wish to find or you can use softkeys to select the "Pre-
selected T/D No." or the "Active T/D No.".
Function
You can delete one or several edges of a tool. The tool list is updated
automatically.
Select the tool edge, press
"Delete" softkey and
the "Delete tool edge" softkey.
The displayed tool edge is deleted.
Parameters Operating Area
5.2 Tool offset
5
5-137