Start-Up - Siemens SINUMERIK 840D Operator's Manual

4
Machine Operating Area
4.2 General functions and displays
Machine manufacturer
References
Set actual
value
9
1
...
Delete
Basic WO
OK
4-82
Please refer to the information and specifications provided by the
machine manufacturer.
/IAM/ Installation & Start-Up Guide /IM2, HMI Embedded
Set actual value assigns the 1st base offset, rough.
Operating sequence
The new setpoint position of the axes in the workpiece coordinate
system can be entered using "Set actual value" in the actual value
window. When you transfer a value to the system by pressing "Input",
the deviation from the current actual value is entered in the basic
offset. The new actual value is displayed in the "Position" column.
"Delete Basic WO" can be selected to undo all the previously entered
offset settings.
Confirm with "OK".
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
4
03.04
 Siemens AG, 2004. All rights reserved