Jog Operating Mode; Function And Basic Display - Siemens SINUMERIK 840D Operator's Manual

4
03.04
4.4

Jog operating mode

4.4.1 Function and basic display

JOG
Jog
or
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
Function
In manual mode you can:
1. Synchronize the measuring system of the control with the machine
(reference point procedure).
2. Set up the machine, i.e. activate manually controlled motions on
the machine using the keys and handwheels provided on the
machine control panel.
3. Activate manually controlled motions on the machine using the
keys and handwheels provided on the machine control panel while
a part program is interrupted.
The following basic display "Jog" is displayed when you press the
"Area switchover" key
and the "Jog" key.
The "Jog" basic display contains values relating to position, feedrate,
spindle and tool.
Machine Operating Area

4.4 Jog operating mode

4
4-87