Unloading Of A Tool - Siemens SINUMERIK 840D Operator's Manual

5
Parameters Operating Area
5.3 Tool management

5.3.5 Unloading of a tool

Tool list
Unload
OK
Abort
Tool list
Unload
OK
Abort
Delete
tool
5-148
Function
This function allows you to unload a selected tool and to save its data.
Operating sequence
Unload from "Magazine list":
The "Magazine list" menu is selected.
The appropriate magazine is selected.
The appropriate tool is selected.
When you press the "Unload" softkey, the magazine number and load
point are displayed in the "Unload" window.
If more than one load point is configured, select the appropriate load
point from the selection window.
When you press "OK," the tool is unloaded.
Press "Abort" to stop the "Unload" process.
"Unload directly from spindle" is possible only if the buffer is selected
and the cursor is positioned on the location of the spindle.
Unload from "Tool list":
The "Tool list" menu is selected.
The appropriate tool is selected.
When you press the "Unload" softkey, the "Unload" window opens
and the magazine number and load point are displayed.
If more than one loading point is configured, select the appropriate
loading point from the selection window.
Click "OK" to begin the unloading process or
Click on "Abort" to abort the process.
The tool data of the selected tool is deleted from the TO memory. You
can do this only if the tool is not currently stored in a magazine
location.
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
5
03.04
 Siemens AG, 2004. All rights reserved