Dodge ram truck 3500 1996 Service Manual page 1451

BR
NV4500 MANUAL TRANSMISSION 21 - 61
DISASSEMBLY AND ASSEMBLY (Continued)
(4) On 2-wheel drive models, remove. extension
housing seal (Fig. 26). Seal can be removed by col­
lapsing one side with punch then prying seal out
with suitable tool.
Fig. 26 Extension Housing And Seal (2-Wheel Drive
Models)
(5) Note that 4-wheel drive adapter housing
does not have a seal (Fig. 27).
Fig. 27 Adapter Housing (4-Wheel Drive Models)
EXTENSION/ADAPTER HOUSING
INSTALLA7SON
(1) I f extension housing seal needs replacement,
remove it collapsing with a punch and chisel. Then
pry seal out of housing with crowfoot pry bar.
(2) I f extension housing bushing must be replaced,
collapse old bushing with tapered drift (Fig. 28).
Position drift i n slot provided at end of housing. Then
tap drift into slot and against bushing to collapse
and remove it.
(3) Remove any burrs from housing bushing bore
with a file and emery cloth.
(4) Install new bushing in extension housing (Fig.
29). Use Tool Handle C-4171 and Installer Tool
SP5559 to install bushing. Note that installer tool
SP5559 is part of tool set C-4469.
(5) Install extension housing seal with Tool
C-4660-3 (Fig. 30).
TAPERED
Fig. 28 Removing Extension Housing Bushing
Fig. 29 Installing Extension Housing Bushing
J9221-201
Fig. 88 Installing Extension Housing Seal