Dodge ram truck 3500 1996 Service Manual page 1227

mm
FRAME AND BUMPERS 13 - 3
REMOVAL AND INSTALLATION (Continued)
INSTALLATION
Reverse the preceding operation.
BUMPER
AIR DAM SCREW
Fig. 4 Front Bumper Air Dam
REAR BUMPER
REMOVAL
(1) Support rear bumper on a suitable lifting
device.
(2) Remove bolts holding rear bumper braces to
frame rails (Fig. 5).
(3) Disengage license plate lamp wire connector
from body wire harness, i f equipped.
(4) Separate rear bumper from vehicle.
INSTALLATION
Reverse the preceding operation.
Fig. 5 Rear Bumper