B R
NV3500 MANUAL TRANSMISSION
21 - 27
DISASSEMBLY AND ASSEMBLY (Continued)
(27) Install two-piece thrust washer (Fig. 84). Be
sure washer halves are seated in shaft groove and
that washer lugs are seated in shaft lug bores.
J9421-77
Fig. 84 installing Two-Piece Thrust Washer
(28) Start retaining ring around two-piece thrust
washer (Fig. 85).
Fig. 85 Starting Retaining Ring Over
Two-Piece
Thrust Washer
(29) Seat thrust washer retaining ring with plastic
mallet (Fig. 86).
Fig. 86 Seating Thrust Washer Retaining
Ring
(30) Install third gear needle bearing on shaft (Fig.
87).
Fig. 87 Third Gear Bearing
installation
(31) Install third gear on shaft and bearing (Fig.
88).
Fig. 88 Installing Third Gear