Dodge Dakota Sport 2001 Service Manual page 1211

9 - 182 ENGINE 4.7L
REAR MOUNT (Continued)
(7) Remove the two nuts retaining the isolator to
the crossmember (Manual transmission and 4x2
automatic transmission only) (Fig. 92) (Fig. 93).
(8) Remove the bolts (two bolts manual transmis-
sion)(three bolts 4x2 automatic transmission) retain-
ing the insulator bracket to the transmission.
Fig. 92 Engine Rear Mount—4X2 Automatic
Transmission
1 - ENGINE REAR MOUNT
2 - BOLT
3 - NUT
4 - THROUGH BOLT NUT
5 - TRANSMISSION
INSTALLATION
(1) Follow the removal procedure in the reverse
order.
(2) Tighten the through bolt retaining nut to 101
N·m (75 ft. lbs.).
(3) Tighten the isolator bracket to transmission
retaining bolts (Manual transmission and 4x2 auto-
matic transmission only) to 68 N·m (50 ft. lbs.).
(4) Tighten the mount bracket to transmission
retaining bolts (4x4 automatic transmission only) to
68 N·m (50 ft. lbs.).
(5) Tighten the isolator mount to crossmember
retaining nuts (Manual transmission and 4x2 auto-
matic transmission only) to 41 N·m (30 ft. lbs.).
(6) Tighten the mount bracket to crossmember
retaining bolts (4x4 automatic transmission only) to
28 N·m (250 in. lbs.).
Fig. 93 Engine Rear Mount—4X2 and 4X4 Manual
Transmission
1 - THROUGH BOLT
2 - BOLT
3 - INSULATOR SUPPORT
4 - NUT
5 - NUT AND WASHER
6 - INSULATOR BRACKET TO TRANSMISSION
Fig. 94 Engine Rear Mount—4X4 Automatic
Transmission
1 - TRANSMISSION
2 - ENGINE REAR MOUNT
3 - BOLT
AN