Machine Torque Specifications; Performance Specifications - Genie ZX-135/70 Service And Repair Manual

Service and Repair Manual
Specifications

Machine Torque Specifications

Platform Rotator
1-8 center bolt, GR 5, dull gray
3/8-16 bolts, GR 8, gray coated
* blue thread locking compound
Turntable rotate assembly
Rotate bearing mounting bolts, lubricated
(3/4 -10 SHC)
Rotate bearing mounting bolts, lubricated
(5/8-11 SHC))
Rotate drive hub mounting bolts, lubricated
Backlash plate mounting bolts, lubricated
Drive motors and hubs
Drive hub mounting bolts, lubricated
Drive motor mounting bolts, dry
Drive motor mounting bolts, lubricated
Engine vibration isolators
Compressed height
Compressed height
14

Performance Specifications

Drive speed, maximum
500 ft-lbs Stowed position, high speed
678 Nm
35 ft-lbs*
47 Nm*
Raised or extended
320 ft-lbs
434 Nm
Primary and Secondary booms
180 ft-lbs
raised, and Primary and Jib
244 Nm
extended
80 ft-lbs
108 Nm
Braking distance, maximum
320 ft-lbs
High range on paved surface
434 Nm
Gradeability
180 ft-lbs
217 Nm
Boom function speeds, maximum from platform
controls
75 ft-lbs
102 Nm
Jib boom up/down
56 ft-lbs
Jib boom extend/retract
76 Nm
Primary boom up/down
-60° to +70°
>0.375 in
Primary boom extend/retract
<0.625 in
Secondary boom up/down
Secondary boom extend/retract
Turntable rotate, 360°
fully stowed
Turntable rotate, 360°jib or
primary booms extended
Turntable rotate, 360°jib and
primary booms extended
For operational specifications, refer to the
Operator's Manual.
ZX®-135/70
April 2018
3.0 mph
4.8 km/h
40 ft / 9.1 sec
12.2 m / 9.1 sec
0.7 mph
1.1 km/h
40 ft / 40 sec
12.2 m / 40 sec
0.4 mph
0.6 km/h
40 ft / 68 sec
12.2 m / 68 sec
3 to 6 ft
1 to 2 m
See Operator's
Manual
38 to 43 seconds
28 to 38 seconds
110 to 125 seconds
35 to 48 seconds
80 to 95 seconds
88 to 98 seconds
88 to 92 seconds
160 to 180 seconds
280 to 350 seconds
Part No. 1279835GT