Manifold Component Specifications; Machine Torque Specifications - Genie Z-30/20N Service Manual

Section 2 • Specifications
SPECIFICATIONS
Manifold Component
Specifications
Plug torque
SAE No. 2
SAE No. 4
SAE No. 6
SAE No. 8
SAE No. 10
SAE No. 12
Valve Coil Resistance
Note: The following coil resistance specifications are at
an ambient temperature of 68°F / 20°C. As valve coil
resistance is sensitive to changes in air temperature,
the coil resistance will typically increase or decrease by
4% for each 18°F / 10°C that your air temperature
increases or decreases from 68°F / 20°C.
Valve Coil Resistance Specification
Description
Solenoid valve, 3 position 4 way, 20V DC
(schematic items A, J, K, U, V, Y, AA, AB and CC)
Proportional solenoid valve, 24V DC
(schematic item H)
Solenoid valve, N.C. poppet, 20V DC
(schematic item M)
Solenoid valve, N.O. poppet, 20V DC
(schematic item P)
2 - 4
36 in-lbs / 4 Nm
10 ft-lbs / 13 Nm
14 ft-lbs / 19 Nm
38 ft-lbs / 51 Nm
41 ft-lbs / 55 Nm
56 ft-lbs / 76 Nm
Specification
22 Ω
19.5 Ω
23.5 Ω
23.5 Ω
Z-30/20N • Z-30/20N RJ • Z-34/22 • Z-34/22N

Machine Torque Specifications

Platform rotator and jib boom rotator (Z-30/20N RJ)
1-8 center bolt, GR 5, lubricated
(Jib boom rotator)
3
/ -10 bolt, GR 8, lubricated
4
(Platform rotator)
3
/ -16 bolts, GR 8, lubricated
8
(Platform rotator)
1
/ -13 bolts, GR 5, lubricated
2
(Jib boom rotator)
Platform rotator (Z-30/20N, Z-34/22 and Z-34/22N)
3
/ -10 bolt, GR 8, lubricated
4
3
/ -16 bolts, GR 8, lubricated
8
Turntable rotate bearing
Rotate bearing mounting bolts, lubricated
Drive hubs, brakes and motors
Drive hub mounting bolts, lubricated
Brake mounting bolts, lubricated
Drive motor mounting bolts
Continuous improvement of our products is a
Genie policy. Product specifications are
subject to change without notice.
June 2011
REV C
480 ft-lbs
650 Nm
280 ft-lbs
379 Nm
23 ft-lbs
31 Nm
57 ft-lbs
77 Nm
280 ft-lbs
379 Nm
23 ft-lbs
31 Nm
180 ft-lbs
244 Nm
180 ft-lbs
244 Nm
93 ft-lbs
126 Nm
31 ft-lbs
42 Nm
Part No. 139378