B700Xxxx Licensed Internal Code Srcs - IBM power PS700 Problem Determination And Service Manual

Table 14. B200xxxx Logical partition SRCs (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
v See Chapter 3, "Parts listing, Type 8406," on page 229 to determine which components are CRUs and which
components are FRUs.
B200 xxxx
Reference Code Description
B200F001 A problem occurred during the
startup of a partition. An operation
has timed out.
B200F003 During the startup of a partition, the
partition processor(s) did not start
the firmware within the time-out
window.
B200F004 Informational system log entry only.
B200F005 Informational system log entry only.
B200F006 During the startup of a partition, the
code load operation for the partition
startup timed out.
B200F007 During a shutdown of the partition,
a time-out occurred while trying to
stop a partition.
B200F008 Informational system log entry only.
B200F009 Informational system log entry only.
B200F00A Informational system log entry only.
B200F00B Informational system log entry only.
B200F00C Informational system log entry only.
B200F00D Informational system log entry only.

B700xxxx Licensed internal code SRCs

A B700xxxx system reference code (SRC) is an error code or event code that is related to licensed internal
code.
Table 15 describes the system reference codes that might be displayed if system firmware detects a
problem. Suggested actions to correct the problem are also listed.
Note: For problems persisting after completing the suggested actions, see "Checkout procedure" on page
184 and "Solving undetermined problems" on page 227.
Table 15. B700xxxx Licensed internal code SRCs
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
v See Chapter 3, "Parts listing, Type 8406," on page 229 to determine which components are CRUs and which
components are FRUs.
B700 xxxx Error Codes
0102
Description
System firmware detected an error. A
machine check occurred during startup.
Action
Look for other errors and resolve them.
Collect the partition dump information; then, go to
"Isolating firmware problems" on page 218.
No corrective action is required.
No corrective action is required.
1. Check the error logs and take the actions for the error
codes that are found.
2. Go to "Isolating firmware problems" on page 218.
Check for server firmware updates; then, install the
updates if available.
No corrective action is required.
No corrective action is required.
No corrective action is required.
No corrective action is required.
No corrective action is required.
No corrective action is required.
Action
1. Collect the event log information.
2. Go to "Isolating firmware problems" on
page 218.
39
Chapter 2. Diagnostics