D1Xx900C To D1Xxc003 Service Processor Power-Off Checkpoints - IBM power PS700 Problem Determination And Service Manual

D1xx900C to D1xxC003 Service processor power-off checkpoints

These D1xx service processor power-off status codes offer information about the status of the service
processor during a power-off operation.
Table 24 lists the progress codes that might be displayed during the power-on self-test (POST), along with
suggested actions to take if the system hangs on the progress code. Only when you experience a hang
condition should you take any of the actions described for a progress code.
Table 24. D1xx900C to D1xxC003 checkpoints
v If the system hangs on a progress code, follow the suggested actions in the order in which they are listed in
the Action column until the problem is solved. If an action solves the problem, you can stop performing the
remaining actions.
v See Chapter 3, "Parts listing, Type 8406," on page 229 to determine which components are CRUs and which
components are FRUs.
Progress code
D1xx900C
D1xxB0FF
D1xxC000
D1xxC001
D1xxC002
D1xxC003
128
Power Systems: Problem Determination and Service Guide for the IBM Power PS700 (8406-70Y)
Description
(Command Being Processed)
Breakpoint set in CPU controls has been
hit
Request to initiate power-off program
has been sent
Indicates a message is ready to send to
the hypervisor to power off
Waiting for the hypervisor to
acknowledge the delayed power off
notification
Waiting for the hypervisor to send the
power off message
Hypervisor handshaking is complete
Action
1. Go to "Checkout procedure" on page 184.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 260.
1. Go to "Checkout procedure" on page 184.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 260.
1. Go to "Checkout procedure" on page 184.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 260.
1. Go to "Checkout procedure" on page 184.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 260.
1. Go to "Checkout procedure" on page 184.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 260.
1. Go to "Checkout procedure" on page 184.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 260.