IBM power PS700 Problem Determination And Service Manual page 109

Table 19. C2001000 to C20082FF checkpoints (continued)
v If the system hangs on a progress code, follow the suggested actions in the order in which they are listed in
the Action column until the problem is solved. If an action solves the problem, you can stop performing the
remaining actions.
v See Chapter 3, "Parts listing, Type 8406," on page 229 to determine which components are CRUs and which
components are FRUs.
Progress code
C2003112
C2003115
C2003150
C20031FF
C20032FF
C2003300
C2003350
C20033FF
Description
Waiting for bus unit to become disabled
Waiting for creation of bus object
Sending ISL command to bus unit
Waiting for ISL command completion
ISL command complete successfully
Start SoftPOR of a failed ISL slot
Waiting for SoftPOR of a failed ISL slot
Finish SoftPOR of a failed ISL slot
Action
1. Go to "Recovering the system firmware" on
page 220.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 260.
1. Go to "Recovering the system firmware" on
page 220.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 260.
1. Go to "Recovering the system firmware" on
page 220.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 260.
1. Go to "Recovering the system firmware" on
page 220.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 260.
1. Go to "Recovering the system firmware" on
page 220.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 260.
1. Go to "Recovering the system firmware" on
page 220.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 260.
1. Go to "Recovering the system firmware" on
page 220.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 260.
1. Go to "Recovering the system firmware" on
page 220.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 260.
Chapter 2. Diagnostics
97