IBM power PS700 Problem Determination And Service Manual page 106

Table 19. C2001000 to C20082FF checkpoints (continued)
v If the system hangs on a progress code, follow the suggested actions in the order in which they are listed in
the Action column until the problem is solved. If an action solves the problem, you can stop performing the
remaining actions.
v See Chapter 3, "Parts listing, Type 8406," on page 229 to determine which components are CRUs and which
components are FRUs.
Progress code
C2001100
C20011FF
C2001200
C20012FF
C2001300
C20013FF
C2001400
C2001410
94
Power Systems: Problem Determination and Service Guide for the IBM Power PS700 (8406-70Y)
Description
Adding partition resources to the
secondary configuration
Partition resources added successfully
Checking if startup is allowed
Partition startup is allowed to proceed
Initializing ISL roadmap
ISL roadmap initialized successfully
Initializing SP Communication Area #1
Initializing startup parameters
Action
1. Go to "Recovering the system firmware" on
page 220.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 260.
1. Go to "Recovering the system firmware" on
page 220.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 260.
1. Go to "Recovering the system firmware" on
page 220.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 260.
1. Go to "Recovering the system firmware" on
page 220.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 260.
1. Go to "Recovering the system firmware" on
page 220.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 260.
1. Go to "Recovering the system firmware" on
page 220.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 260.
1. Go to "Recovering the system firmware" on
page 220.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 260.
1. Go to "Recovering the system firmware" on
page 220.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 260.