IBM power PS700 Problem Determination And Service Manual page 24

v Power-on self-test (POST) progress codes (checkpoints), error codes, and isolation procedures
The POST checks out the hardware at system initialization. IPL diagnostic functions test some system
components and interconnections. The POST generates eight-digit checkpoints to mark the progress of
powering up the blade server.
Use the management module to view progress codes.
The documentation of a progress code includes recovery actions for system hangs. See "POST progress
codes (checkpoints)" on page 84 for more information.
If the service processor detects a problem during POST, an error code is logged in the management
module event log. Error codes are also logged in the Linux syslog or AIX
See "System reference codes (SRCs)" on page 16.
The service processor can generate codes that point to specific isolation procedures. See "Service
processor problems" on page 200.
v Light path diagnostics
Use the light path diagnostic LEDs on the system board to identify failing hardware. If the system
error LED on the system LED panel on the front or rear of the BladeCenter unit is lit, one or more
error LEDs on the BladeCenter unit components also might be lit.
Light path diagnostics help identify failing customer replaceable unit (CRUs). CRU location codes are
included in error codes and the event log.
LED locations
See "System-board LEDs" on page 9.
Front panel
See "Blade server control panel buttons and LEDs" on page 5.
v Troubleshooting tables
Use the troubleshooting tables to find solutions to problems that have identifiable symptoms.
See "Troubleshooting tables" on page 191.
v Dump data collection
In some circumstances, an error might require a dump to show more data. The Integrated
Virtualization Manager (IVM) or Hardware Management Console (HMC) sets up a dump area. Specific
IVM or HMC information is included as part of the information that can optionally be sent to IBM
support for analysis.
See "Collecting dump data" on page 13 for more information.
v Stand-alone diagnostics
The AIX-based stand-alone diagnostics CD is in the ship package and is also available from the IBM
Web site. Boot the diagnostics from a CD drive or from an AIX network installation manager (NIM)
server if the blade server cannot boot to an operating system, no matter which operating system is
installed.
Functions provided by the stand-alone diagnostics include:
– Analysis of errors reported by platform, such as microprocessor and memory errors
– Testing of resources, such as I/O adapters and devices
– Service aids, such as firmware update, format disk, and Raid Manager
v Diagnostic utilities for the AIX operating system
Run AIX concurrent diagnostics if AIX is functioning instead of the stand-alone diagnostics. Functions
provided by disk-based AIX diagnostics include:
– Automatic error log analysis
– Analysis of errors reported by platform, such as microprocessor and memory errors
– Testing of resources, such as I/O adapters and devices
– Service aids, such as firmware update, format disk, and Raid Manager
v Diagnostic utilities for Linux operating systems
12
Power Systems: Problem Determination and Service Guide for the IBM Power PS700 (8406-70Y)
®
diagnostic log, if possible.