Station Speed Dial Memory Clear - NEC Xen IPK Programming Manual

December 2004
Station Speed Dial Memory
Clear
Use this Memory Block to clear the Station Speed Dial memories of all programmed Speed
Dial numbers.
N
Before programming this procedure, please ensure you understand completely the
affect of erasing all Station Speed Dial buffers in the system.
Display
C L R T E L
T I M E
Programming Procedures
1 Go off-line.
2 Press LK8 + LK3 to access the Memory Block.
3 When the system display prompt indicates CLR TEL SPD?, the first four CO/PBX lines light red.
WWWW
RedRedRed Red
4 Press HBII
Note: When entering the password the top line of CO/PBX LEDs change from red to green each time a number of the password
is pressed.
WWWW
H =
Green
WWWW
B =
Green Green
WWWW
I =
Green Green Green
WWWW
I =
Green Green Green Green
N
5 Press to write the data.
P
Press to go back on-line.
6
Related Programming
No related programming is necessary for this Memory Block.
516 – Chapter 1
S P D ?
D I S P L A Y
to enter the fixed password.
Red Red Red
Red Red
Red
NEC Business Solutions Ltd
DRAFT 3

Station Speed Dial Memory Clear, 8-3

8-3
System Mode
8
Spd-Clr-Sta
3
Data No.
—
PC Programming
+ BE