NEC Xen IPK Programming Manual page 38

December 2004
LK 1 System Mode
LK 8 PBR/Miscellaneous (Continued)
Data
Memory Block Name
No.
13 VRS Message Function Assignment
15 Tone Assignment
16 Voice Prompt to Tone Assignment
17 PC Programming Password Assignment
18 Site Name Assignment
25 ACD/UCD Group Agent Assignment
26 Voice Mail Quick Transfer Master Hunt
Number
27 Forced Account Code Length Assignment
29 SCD (Simplified Call Distribution) Pilot
Number Assignment
30 SCD Group Agent Assignment
31 Hold Tone Source Selection
32 Hold Internal Tone Volume Selection
33 Master Clock Selection
35 COM Port Baud Rate Setting Assignment
36 COM Port Parity/Stop Bit Setting
Assignment
37 General Purpose Relay Assignment
38 Modem Port for Remote Programming
Assignment
40 ACD Hunt Timer
47 CAR for Voice Mail Message Notice
Assignment
18 – Chapter 1
Default Value
No Message
Tone A
DT = VP1
CWT = VP2
Class 1 All Blank
Blank
Not Specified
Not Specified
4 Digits
Not Specified
Not Specified
Internal
0 dB
Cabinet No. = 0
(No Assign)
COM 1: 38.4 Kbps
COM 2: 4.8 Kbps
COM 3: 4.8 Kbps
COM 4: 9.6 Kbps
COM 1~4: None/1
No
Not Specified
10 sec.
Not Specified
DRAFT 3
NEC Business Solutions Ltd
Programming Values
No Message
Voice Prompt 1~2
1st and 2nd Delay Announce
Day Mode A.A. 1~8
Night Mode A.A. 1~8
Weekend Mode A.A. 1~8
Refer to Tone Assignment on page 1-234.
Assign Voice Prompt 1 or 2 to Dial Tone and
Call Waiting Tone
Class 1: ID No. Assign Up to 8 digits
Up to 8 Digit
Tel No. = Up to 32 Agents (ACD/UCD Group
No 1~4)
Station No.
2 Digit = 00~99
3 Digit = 000~999
4 Digit = 0000~9999
1~13 Digits
Tel No. (up to 4 digit) for SCD Group No. 1~4
Up to 32 Agents Divided (SCD Group No.
1~4)
Internal or External
0 dB, -6 dB
Cabinet: 0~3
Slot: 1~8
COM 1~4: 4.8 Kbps, 9.6 Kbps, 19.2 Kbps,
38.4 Kbps
COM 1~4: None/1, None/2, Even/1, Odd/1
Yes = Assigned, No = Not Assigned
Station No.
2 Digit = 00~99
3 Digit = 000~999
4 Digit = 0000~9999
10 sec., 20 sec., 30 sec., 60 sec., 120 sec.,
240 sec., No Limit.
Any unused CAR
Multiline Terminal Programming