NEC Xen IPK Programming Manual page 296

December 2004
N
1. PRT defaults as PRT 32.
Memory Block 1-13-04 must then be programmed to show the exact number of available channel.
2. Two slots will be used for 30 B channel PRT, PRT 20, 10 take one slot.
3. As channel 16 is a signalling channel, it cannot be set.
4. Only 16 Channels can be assigned with the Elite IPK Basic Port Package.
5. UP to eight PRT ETUs can be assigned.
6. The number of available channels depends on the PRT(1)-U( ) assigned in Memory Block 7-1.
7. For example, when PRT8 is assigned in Memory Block 7-1, any eight channels can be assigned (allowed) in this
Memory Block. Any channel skipped (Not Assigned) is still an available channel from 0 to the last assigned channel.
8. A PRT(1)-U( ) ETU must be assigned in the system to set this Memory Block.
DRAFT 3
276 – Chapter 1
NEC Business Solutions Ltd
PRI Channel Assignment, 1-13-00