Station Number Assignment - NEC Xen IPK Programming Manual

Xen IPK

Station Number Assignment

General Description
Use this memory block to assign a station number to each telephone.
Display
Tel Port
No.
Data
(01~99)
No.
A0~C0
0 1 / 1 0 : S T A
T I M E
Programming Procedures
Go off-line.
1
Press LK4 +
2 AK
3 Use dial pad to enter Setting Data for 2- (00
~
4-digit (0000 9999) station number.
Note: Use the following to enter data:
J to move the cursor left
L
to move the cursor right
K ~ I to enter numeric data
R
to move to the next Tel No
4 After entering all data, press
P
5 Press to go back on-line.
Related Programming
M.B. Number
1-1-46 Access Code (1-Digit) Assignment
1-1-47 Access Code (2-Digit) Assignment
1-2-03 2-, 3-, or 4-Digit Station Number Selection
N
1. Station Number Assignment is per station. A station number cannot be assigned to more than one telephone. A
telephone cannot have more than one station number.
2. When changing Station Numbers to a different numbering plan perform the following steps in order.
a. Select Station Numbers using Memory Block , 1-2-03 , 2-, 3-, or 4-Digit Station Number Selection.
b. Program applicable Access Code in Memory Block , 1-1-46 , Access Code (1-Digit) Assignment or , 1-1-47
, Access Code (2-Digit) Assignment.
c. Program all Station Numbers using this Memory Block.
3. Telephone ports A0~C0 are ports 100~120.
4-10, Station Number Assignment
Setting
Data
Title
(00~9999)
= 1 0 0
D I S P L A Y
to access the Memory Block.
~
99) , 3- (000
N
to write the data.
~
999), or
Memory Block Name
Programming Manual
4-10
System Mode
4
Submode
—
Data No.
10
PC Programming
+ BS
Default Values
Valid Station Numbers are 100
DRAFT 3
Chapter 1 – 417
~
399.