Disa/Id Password Effect/Invalid Selection - NEC Xen IPK Programming Manual

December 2004
DISA/ID Password Effect/
Invalid Selection
General Description
Use this Memory Block to assign a Direct Inward System Access (DISA) Password as Invalid
(LK1) or Effective (LD2). If invalid is assigned, the calling party can use the DISA feature without
a DISA Password.
Display
ID Buffer No. Data
(01~C0) No.
0 1 / 0 2 : P A S W O R D = Y S
T I M E
Settings
LK 1 LK 2
No Yes
LK 5 LK 6
Programming Procedures
1 Go off-line.
2 Press LK1 + LK9 +
KB
Press the corresponding CO/PBX line key to change the data option.
3
Setting Data:
NO (LK1) = DISA Password Invalid (Password is not required).
YES (LK2) = DISA Password in Effect (Password is required. Assign with MB , 1-1-46~, 1-1-48).
Note: Use the following to enter data:
J
to move the cursor left
L to move the cursor right
K I
~ to enter numeric data
R
to access the next ID buffer number
Q
+1, 2, 3 = A, B, or C for Port Number
ID Buffer Number:
N
4 Press to write the data.
P
5 Press to go back on-line.
Related Programming
M.B. Number
Refer to Chapter 2, Guide to Feature Programming.
DRAFT 3
256 – Chapter 1
Setting
Title Data
D I S P L A Y
LK 3 LK 4
The shaded area indicates
the default setting.
LK 7 LK 8
to access the Memory Block.
01~99 = 01~99
A0~A9 = 100~109
B0~B9 = 110~119
C0 = 120
Memory Block Name

DISA/ID Password Effect/Invalid Selection, 1-9-02

NEC Business Solutions Ltd
1-9-02
System Mode
1
Submode
9
Data No.
02
PC Programming
+ BD