Centralised Blf Send Extension Number Assignment - NEC Xen IPK Programming Manual

December 2004
Centralised BLF Send
Extension Number
Assignment
General Description
Use this Memory Block to assign the Extension Numbers for sending Centralised BLF
messages
.
System Software R2000 or higher is required.
Display
Data
No. Title
1 6 : S E N D
T I M E
Settings
LK1 LK2
Send Group Send Group Send Group
1 2
Programming Procedures
1 Go off-line.
Press LK1 + LK15 +
2 AF
3 Use dial pad keys to enter Table number and Extension No.
Note: Use the following to enter data:
J
to move cursor left.
L
to move cursor right.
K ~ I to enter numeric data.
Three Digit Extension Number: 000~999
Four Digit Extension Number: 0000~9999
Tables 001~120 can be assigned.
4 Press corresponding CO/PBX line key to select the Send Group No.
N
5 Press to write the data, and display the next Memory Block.
6 Repeat Steps 3 and 4 for each Send Group No.
7 Program the next Memory Block or p
DRAFT 3
322 – Chapter 1
Table No. Extension
(001~120) Number
0 0 1 =
D I S P L A Y
LK3 LK4 LK5
Send Group Send Group
3 4 5
to access the Memory Block.
P
ress to go back on-line.
LK6 LK7
Send Group Send Group
6 7
Default Values :
All Tables Not Specified

Centralised BLF Send Extension Number Assignment, 1-15-16

NEC Business Solutions Ltd
System Mode
Submode
Data No.
PC Programming
LK8
The shaded area indicates
Send Group
the default setting.
8
1-15-16
1
15
16
+ AW