NEC Xen IPK Programming Manual page 37

Xen IPK
LK 1 System Mode
LK 7 ESP
Data
Memory Block Name
No.
00 Doorphone Assignment
01 Doorphone Display Time Selection
02 External Speaker Connection Selection
03 External Paging Alert Tone Selection
04 Doorphone Ringing Pattern Selection
05 Doorphone Ringing Frequency Selection
06 External Paging Timeout Selection
07 External Ring Relay Cycle Selection
08 External Speaker Chime Selection
09 External Speaker Chime Start
Time Selection
LK 1 System Mode
LK 8 PBR/Miscellaneous
Data
Memory Block Name
No.
01 SLT or Automated Attendant/DISA to
PBR Selection
02 PBR Receive Level Assignment for
Automated Attendant/DISA
04 Time Display (12h/24h) Selection
07 Class of Service (Attendant)
Feature Selection 1
08 Class of Service (Station)
Feature Selection 2
09 Music on Hold Pattern Selection
10 PBR Interdigit Release Timer Selection
11 System Refresh Timer Assignment
12 VRS Message Recording Time Selection
Programming Manual
Default Value
No
10 sec.
All Yes
Yes
On
C
5.0 min.
Pattern 3
Pre-Tone
700 ms.
Default Value
Off
–46.0 dBm
12-hour Display
Refer to Class of Service (Attendant) Feature Selection 1 on page 1-220.
Refer to Class of Service (Station) Feature Selection 2 on page 1-223.
Pattern A
7 sec.
4 hr.
15 sec./16 Messages
DRAFT 3
Programming Manual
Programming Values
No (Not Assign)/Yes (Assign)
10 sec., 30 sec., 60 sec., 90 sec.
No, Yes per Speakers (A~C)
Yes, No
Off, On, A~H
A~H
0.5 min., 1 min., 1.5. min., 2 min., 3 min.,
5 min., 8 min., No Limit
Pattern 1, 2, 3, 4, 5, 6, Continuous
Pre-Tone/Chime (Start)/ Chime (Both)
0~1500 msec = (Input value) x 100 msec
Programming Values
Off = Single Line Telephone
On = Automated Attendant/DISA
–33 dBm ~ –48 dBm @ iDB Step
12-hour Display
24-hour Display
Pattern A, Pattern B
3 sec., 4 sec., 5 sec., 6 sec., 7 sec., 8 sec.,
9 sec., 10 sec.
No Refresh, 4 hr., 8 hr., 12 hr., 24 hr.
15 sec./16 Messages
30 sec./8 Messages
60 sec./4 Messages
120 sec./2 Messages
Chapter 1 – 17