Speed Dial - System/Group/Station; Holding Calls; Transferring Calls; Do Not Disturb - NEC Univerge SV8100 User Manual

1.
5. Hang up.
Speed Dial – System/Group/Station
1. Lift handset.
2. Dial Speed Dial code:
Station Speed Dial = #7
Group Speed Dial = #4
System Speed Dial = #2
3. Dial Speed Dial Memory location:
Station Speed Dial = 0~9
Group Speed Dial = xxx (none at default)
System Speed Dial = 000~999
4. Converse.

Holding Calls

E H
XCLUSIVE OLD
With a call in progress:
Press Hookswitch or Flash Key.
Replacing the handset when a call is on hold will
Note 1:
cause the held call to immediately ring your
station.
Once a call is placed on hold, the telephone can be
Note 2:
used to place another internal or outside call or
access a feature (i.e, Call Pickup). Replace
handset to return to the original party.

Transferring Calls

With a call in progress:
1. Press Hookswitch or Flash Key.
2. Dial station number.
3. Announce call (optional).
4. Replace handset.
If the called station is busy, replacing handset will
Note 1:
initiate a camp-on. An unanswered camp-on or
ring transferred call will recall to your telephone
after a preprogrammed time interval.
To return to the original party, press Hookswitch.
Note 2:
To transfer a call directly to a personal voice
Note 3:
mailbox, dial 8 after dialing the station number.

Do Not Disturb

Do Not Disturb blocks incoming calls and Paging
announcements.
1. Dial 747.
2. Dial the DND option code:
0 = Cancel DND
1 = Incoming Trunk Calls Blocked
2 = Paging, Incoming Intercom, Call Forwarding
and Transferred trunk calls blocked.
3 = All Calls Blocked
4 = Call Forwards Blocked
4