Telephone Ringing Variation Selection - NEC Xen IPK Programming Manual

December 2004
Telephone Ringing Variation
Selection
General Description
Use this Memory Block to assign a Low, Medium, or High ringing tone frequency if Telephone is
specified in Memory Block, 1-1-28 , Distinctive Ringing by Telephone or CO Selection.
Display
Tel Port No.
Data
(01~99)
No.
A0~C0
0 1 / 9 1 : R N G T O N E
T I M E
Settings
LK 1 LK 2
Medium Low
LK 5 LK 6
Programming Procedures
1 Go off-line.
2 Press LK4 + to access the Memory Block.
IA
Press the corresponding CO/PBX line key to change data option.
3
Use the following to change option:
R
select next Tel Port No.
N
4 Press to write the data.
P
5 Press to go back on-line.
Related Programming
M.B. Number
1-1-28 Distinctive Ringing by Telephone or CO Selection
N
1. This block is applicable for telephones selected in Memory Block , 1-1-28 , Distinctive Ringing by Telephone or CO
Selection.
2. Selected ringing tone (H, M or L) follows when transferring calls.
3. Telephone ports A0~C0 are ports 100~120.
DRAFT 3
476 – Chapter 1
Setting
Title Data
= M
D I S P L A Y
LK 3 LK 4
High
The shaded area indicates
the default setting.
LK 7 LK 8
Memory Block Name

Telephone Ringing Variation Selection, 4-91

NEC Business Solutions Ltd
4-91
System Mode
4
Submode
—
Data No.
91
PC Programming
+ BTM