NEC Xen IPK Programming Manual page 32

December 2004
LK 1 System Mode
LK 1 CO Line (Continued)
Data
Memory Block Name
No.
61 8-Digit Matching Table to Class
Assignment
62 System Speed Dial Override
by Class Selection
63 Hold Recall Time Selection (Exclusive)
64 Attendant Add-On Console Transfer/
Camp-On Recall Timer Selection
65 Code Restriction Class Allow/
Deny Selection
66 8-Digit Matching Table to Normal Dial
Assignment
67 OCC Table Assignment
68 8-Digit Matching Table to
OCC Table Assignment
69 Tie Line Code Restriction Assignment
70 Code Restriction Class Assignment when
Lockout is Set
71 First Delay Announcement Start Time
Selection
72 First Delay Announcement
Repeat Selection
73 First to Second Delay Announcement
Interval Time Selection
74 Second Delay Announcement
Repeat Selection
75 Second Delay Announcement
Repeat Interval Time Selection
76 Barge-In Alert Tone Assignment
77 Delayed Ringing Timer Assignment (CO)
78 Caller ID Display Assignment for System
Mode
79 BGM Port Assignment
80 ISDN DTMF Duration/Interdigit Time
Selection
81 ISDN Dial Interval Timer
82 Code Restriction Bypass Table
85 ISDN Stimulus Method Selection
12 – Chapter 1
Default Value
Refer to 8-Digit Matching Table Assignment on page 1-98.
Override (YS)
1 min.
1 min.
Class 01 = Deny
Class 02 ~ 14 Allow (YS)
Tables 00 ~ 15 = Used
Table 15 = Unused
Not Specified
Table 00~15 = All Not
Used
Table 16 = 00~14 Not
Used, 15 Used
(YS) Restriction
Class 01
20 sec.
1 Time
20 sec.
1 Time
20 sec.
15 sec.
Not Specified
Not Specified
DD/IT = 100 ms/70 ms
8 sec.
Not Specified
DRAFT 3
NEC Business Solutions Ltd
Programming Values
No = No Override
Yes = Override
0.5 min., 1 min., 1.5 min., 2 min., 3 min.,
5 min., 8 min., No Limit
0.5 min., 1 min., 1.5 min., 2 min., 3 min.,
5 min., 8 min., 10 min.
Allow, Deny
Used, Unused
0~9, *, X, P, N
8-digit Matching Table Used or Not Used
No = No Restriction
Yes = Restriction
Restriction Class: 00 ~ 15
0 sec., 10 sec., 20 sec., 30 sec., 40 sec.,
50 sec., 60 sec.
1, 2, 3, 4, 5, 6, 7, 8 times
0 sec., 10 sec., 20 sec., 30 sec., 40 sec.,
50 sec., 60 sec., No Limit
1, 2, 3, 4, 5, 6, 7, 8 times
0 sec., 10 sec., 20 sec., 30 sec., 40 sec.,
50 sec., 60 sec., No Limit
00 ~ 99
Combination No = 1~5
Selectable Tel No = 1~20
CO No. (01~64)
DD/IT = 70/60 ms, 100/70 ms, 400/100 ms,
600/100 ms, 900/200 ms
2s, 4s, 8s, 16s, 32s
10 Digits (0~9) x 10 Tables
Multiline Terminal Programming