Co External Source Selection - NEC Xen IPK Programming Manual

Xen IPK

CO External Source Selection

General Description
Use this Memory Block to specify which CO Trunk is to have an External Music Source
connected. A powered LIU must be used for Music Source Input. (Refer to the System Hardware
Manual for details).
Display
CO/PBX
Data
No.
No.
(01~64)
1 1 / 1 1 : C O
T I M E
Settings
LK 1 LK 2
CO Ext Source
LK 5 LK 6
Programming Procedures
1 Go off-line.
N
2 Press LK3 + +
3 Press the corresponding CO/PBX line key to change the data option.
Note: Use the following when entering data:
R
to go to the next CO/PBX Line No.
N
4 Press to write the data.
P
5 Press to go back on-line.
Related Programming
M.B. Number
3-12 CO Hold Melody Selection (CO)
N
1. This is also used for Tie lines.
2. When CO is set for EXT SOURCE and left in a trunk group, that CO is skipped in dialling access of the trunk group.
3-11, CO External Source Selection
Title
D I S P L A Y
LK 3 LK 4
The shaded area indicates
the default setting.
LK 7 LK 8
AA to access the Memory Block.
Memory Block Name
Programming Manual
System Mode
3
Submode
—
Data No.
11
PC Programming
+ BCT
DRAFT 3
Chapter 1 – 347
3-11