NEC Xen IPK Programming Manual page 151

Xen IPK
Programming Procedures (Continued)
3 Use the dial pad to enter the time required.
Note: J to move cursor left.
L to move cursor right.
Setting Data (Allow): Class 1 to Class 4: 00 to 99 sec
N
Press to write the data.
4
P
Press to go back on-line.
5
Related Programming
4-71 Time Class Assignment for Telephone Mode (R2000 and above)
1-2-02, Automatic Callback Release Timer Selection
Default values:
Class 1 to Class 4 = 30 secs
00 = No Limit
Programming Manual
DRAFT 3
Chapter 1 – 131