External Speaker Chime Start Time Selection - NEC Xen IPK Programming Manual

Xen IPK
External Speaker Chime Start
Time Selection
General Description
This Memory Block is used only when paging alert tone (4-tones) is assigned in Memory Block 1-
7-08 (External Speaker Chime Selection). This Memory Block assigns the delay after an external
paging code is dialled and before the paging alert tone is provided.
Display
Data
No.
Title
0 9 : S T A R T = 7 0 0 m s
T I M E
(Page 1)
LK 1 LK 2
0 ms. 100 ms.
LK 5 LK 6
400 ms. 500 ms.
(Page 2)
LK 1 LK 2
800 ms. 900 ms.
LK 5 LK 6
1200 ms. 1300 ms.
Programming Procedures
1 Go off-line.
2 Press LK1 + LK7 +
KI
3 Press the corresponding CO/PBX line key to change the data option.
Note: Use the following when entering data:
S
to go to the next page
T
to go to the previous page
N
4 Press to write the data and advance to Memory Block 1-8-01 SLT or Automated Attendant/DISA to PBR Selection.
P
5 Press to go back on-line.
Related Programming
M.B. Number
1-7-08 External Speaker Chime Selection

1-7-09, External Speaker Chime Start Time Selection

Setting
Data
D I S P L A Y
LK 3 LK 4
200 ms. 300 ms.
LK 7 LK 8
600 ms. 700 ms.
The shaded area indicates
the default setting.
LK 3 LK 4
1000 ms. 1100 ms.
LK 7 LK 8
1400 ms. 1500 ms.
to access the Memory Block.
Memory Block Name
Programming Manual
1-7-09
System Mode
1
Submode
7
Data No.
09
PC Programming
+ BP
DRAFT 3
Chapter 1 – 215