Dial By Name Using Station Speed Dialing; To Place A Call On Hold; To Save A Name & Number To Station Speed Dialing - NEC DT300 Series User Manual

Dial By Name Using Station Speed Dialing

To Initiate:
Press the Directory key.
Enter up to the first four characters of a name using
the keypad.
Press the UP or DOWN key to start the search.
The name and the number are shown on the LCD. If
more than one name matches the letters entered,
scroll through the matches with the UP or DOWN soft
key.
If no matches are founds, the first System Speed Dial
buffer will be displayed.
Press the Speaker key, or selecting a Line/Trunk key
to dial the selected number.
To Save A Name & Number to Station Speed
Dialing
To register Name & Number:
Press the Directory key
Press the UP or DOWN key to select buffer to be
programmed
Press the Feature Key
Using the key pad enter the name
Press the Feature Key
Using the key pad enter the number
NOTE: When entering an outside number you must include
the Trunk Access Code (i.e., 9) followed by area code and
number. For a name the first 7 characters plus * for names
longer than 8 characters and the * plus last 7 digits of a
number longer than 8 digits. Example: Name display
programmed is ABCDEFGHI button will show ABCDEFG*.
Number display programmed is 123456789 button will show
*3456789.
To Transfer A Call
After conversing, ask party to hold.
Press Transfer key. Receive interrupted dial tone.
XFR
4:26 PM TUE 12 FEB 2008
Dial destination station's extension, hang up or wait
for answer.

To Place A Call On Hold

Press Hold key. Held line wink flashes.
HLD
4:26 PM TUE 12 FEB 2008
NOTE: If held line appears on other stations, the
associated LED flashes red slowly.
To Retrieve:
Lift handset or press Speaker key.
Press held line. Use handset to converse.
NOTE: Any station with this line appearance can retrieve
the call.
33
Transferred station
or trunk number
2001
Held station
number
2001