Assembling The Starter Motor - Yamaha MT-03 Service Manual

7. Check:
• Gear teeth
Damage/wear Replace the gear.
8. Check:
• Bearing
• Oil seal
Damage/wear Replace the defective part(s).
EAS00772

ASSEMBLING THE STARTER MOTOR

1. Install:
• Brush seat "1"
NOTE:
Align the tab "a" on the brush seat with the slot
"b" in the starter motor yoke.
2. Install:
• Lock washer
NOTE:
Align the tabs "a" on the lock washer with the
groves in the front bracket.
a
ELECTRIC STARTER
3. Install:
• Rear bracket
NOTE:
Align the slot "a" in the rear bracket with the tab
"b" on the brush seat.
a
4. Install
• Starter motor yoke "1"
• Front bracket "2"
• Rear bracket "3"
• O-rings "4"
• Bolts
Starter motor bracket bolts
5 Nm (0.5 m·kg, 3.6 ft·lb)
NOTE:
Align the alignment marks "a" on the starter
motor yoke with the alignment marks "b" on the
front and rear brackets.
b
New
5. Install:
• Starter motor gear
• Circlip
5-60
New
1
2
3
a
New
4 4
b
b