Yamaha MT-03 Service Manual page 91

NO. ITEM
Sidestand
17 *
switch
Front fork
18 *
(See page 3-25)
Shock absorber
19 * assembly
(See page 3-25)
Side suspension
relay arm and
20 * connecting arm
pivoting points
(See page 3-28)
Fuel injection
21 *
(See page 3-5)
Engine oil
22
(See page 3-9)
Engine oil filter
23 element
(See page 3-10)
Cooling system
24 *
(See page 3-14, 3-16)
Front and rear
25 *
brake switches
Moving parts and
26 cables
(See page 3-28)
Throttle grip
27 * housing and cable
(See page 3-5)
Air induction
28 *
system
Muffler and
29 * exhaust pipe
(See page 3-14)
Lights, signals
30 *
(See page 3-31)
NOTE:
The air filter needs more frequent service if you are riding in unusually wet or dusty areas.
Hydraulic brake service
Regularly check and, if necessary, correct the brake fluid level.
Every two years replace the internal components of the brake master cylinders and calipers,
and change the brake fluid.
Replace the brake hoses every four years and if cracked or damaged.
CHECK OR MAINTENANCE JOB
• Check operation.
• Check operation and for oil leakage.
• Check operation and shock absorber for oil leakage.
• Check operation.
• Lubricate with lithium-soap-based grease.
• Adjust engine idling speed.
• Change.
• Check oil level and vehicle for oil leakage.
• Replace
• Check coolant level and vehicle for coolant leakage.
• Change.
• Check operation.
• Lubricate.
• Check operation and free play.
• Adjust the throttle cable free play if necessary.
• Lubricate the throttle grip housing and cable.
• Check the air cut-off valve, reed valve, and hose
for damage.
• Check fuel hoses for cracks or damage.
• Check the screw clamp for looseness.
• Check operation.
• Adjust headlight beam.
PERIODIC MAINTENANCE
ODOMETER READING (x 1,000 km) ANNUAL
1
3-2
10 20 30 40
Every 3 years
CHECK