Removing The Front Wheel; Disassembling The Front Wheel; Checking The Front Wheel - Yamaha MT-03 Service Manual

EAS21900

REMOVING THE FRONT WHEEL

1. Stand the vehicle on a level surface.
EWA13120
WARNING
Securely support the vehicle so that there is
no danger of it falling over.
NOTE:
Place the vehicle on a suitable stand so that
the front wheel is elevated.
2. Remove:
• Front brake calipers
NOTE:
Do not apply the brake lever when removing
the front brake calipers.
EAS21910

DISASSEMBLING THE FRONT WHEEL

1. Remove:
• Oil seals
• Wheel bearings
a. Clean the outside of the front wheel hub.
b. Remove the oil seals "1" with a flat-head
screwdriver.
NOTE:
To prevent damaging the wheel, place a rag "2"
between the screwdriver and the wheel sur-
face.
c. Remove the wheel bearings "3" with a gen-
eral bearing puller.
EAS21920

CHECKING THE FRONT WHEEL

1. Check:
• Front wheel axle
Roll the wheel axle on a flat surface.
Bends Replace.
EWA13460
WARNING
Do not attempt to straighten a bent wheel
axle.
2. Check:
• Tire
• Front wheel
Damage/wear
Refer to "CHECKING THE TIRES" on page
3-26 and "CHECKING THE WHEELS" on
page 3-27.
3. Measure:
• Radial wheel runout "1"
• Lateral wheel runout "2"
Over the specified limits
Radial wheel runout limit
1.0 mm (0.04 in)
Lateral wheel runout limit
0.5 mm (0.02 in)
4-8
FRONT WHEEL
Replace.
Replace.