Yamaha MT-03 Service Manual page 361

Standard key registration
a. Main switch "ON"
b. Main switch "OFF"
c. LED on
d. LED off
e. Less than 5.0 s
f. Code re-registering key
Voiding the standard key code:
If a standard key has been lost, it is possible to disable its use by re-registering the remain-
ing standard key. Standard key registration erases the stored standard key code from the
memory, thus disabling the lost standard key.To re-register, refer to "Standard key registra-
tion".
Standard key code voiding method
a. Main switch "ON"
b. Main switch "OFF"
c. LED on
d. LED off
e. Less than 5.0 s
IMMOBILIZER SYSTEM
g. First standard key
h. Second standard key
i. Registration mode
A. Registration of the second standard key is
complete.
B. Immobilizer system indicator light stops flashing
when the registration of the second standard key
is complete.
f. Code re-registering key
g. Remaining standard key
h. Registration mode
A. If the immobilizer system indicator light stops
flashing 5 seconds after the first standard key
is registered, the second standard key cannot
be registered.
8-34