Yamaha MT-03 Service Manual page 140

Rear brake disc bolt
30 Nm (3.0 m·kg, 22 ft·lb)
LOCTITE
NOTE:
Tighten the brake disc bolts in stages and in a
crisscross pattern.
2. Check:
• Rear brake disc
Refer to "CHECKING THE REAR BRAKE
DISC" on page 4-35.
3. Lubricate:
• Oil seal lips
• Collars
Recommended lubricant
Lithium-soap-based grease
4. Install:
• Collar (wheel sprocket side)
• Collar (brake disc side)
• Rear brake caliper
(on the swingarm)
• Rear wheel
(on the swingarm)
• Drive chain
(on the rear sprocket)
• Rear wheel axle
• Rear wheel axle nut
5. Adjust:
• Drive chain slack
Refer to "ADJUSTING THE DRIVE CHAIN
SLACK" on page 3-22.
Drive chain slack
40.0–50.0 mm (1.57–1.97 in)
®
4-17
REAR WHEEL