Yamaha MT-03 Service Manual page 119

1
c. Install:
• Auxiliary light bulb into the socket (by push-
ing it in)
New
• Auxiliary light socket (together with the bulb)
by pushing it in.
REPLACING THE TAIL/BRAKE
LIGHT BULB
1. Replace:
• Tail/brake light bulb
a. Remove:
• Tail/brake light bulb cover bolts "1"
• Tail/brake light bulb cover "2"
1
2
b. Remove:
• Tail/brake light socket "1" (together with the
tail/brake light bulb)
Turn the socket counterclockwise.
• Tail/brake light bulb "2"
Push in and turn the bulb counterclockwise.
2
1
ELECTRICAL SYSTEM
c. Install:
• Tail/brake light bulb into the socket (by
pushing it in and then turning it clockwise
until it stops)
• Tail/brake light socket (together with the
bulb) by turning it clockwise.
• Tail/brake light bulb cover
• Tail/brake light bulb cover bolts
d. Tighten:
• Tail/brake light bulb cover bolts
Tail/brake light bulb cover bolt
10 Nm (1.0 m·kg, 7.2 ft·lb)
REPLACING A TURN SIGNAL LIGHT BULB
1. Replace:
• Turn signal light bulb
a. Remove:
• Turn signal light lens screw "1"
• Turn signal light lens "2"
• Turn signal light bulb "3"
Push in and turn the bulb counterclockwise.
2
1
b. Install:
• Turn signal light bulb into the socket (by
pushing it in and then turning it clockwise
until it stops)
• Turn signal light lens
• Turn signal light lens screw
3-30
1
2
New
3
New