EAS00421
CHECKING THE SHIFT FORKS
The following procedure applies to all of the
shift forks.
1. Check:
• Shift fork cam follower "1"
• Shift fork pawl "2"
Bends/damage/scoring/wear
shift fork.
2. Check:
• Shift fork movement
Rough movement
EAS00422
CHECKING THE SHIFT DRUM ASSEMBLY
1. Check:
• Shift drum grooves
Damage/scratches/wear
drum assembly.
• Shift drum segment "1"
Damage/wear
Replace the shift drum as-
sembly.
• Shift drum bearing "2"
Damage/pitting
sembly.
Replace the
Replace the shift forks.
Replace the shift
Replace the shift drum as-
EAS00425
CHECKING THE TRANSMISSION
1. Measure:
• Main axle runout
(with a centering device and dial gauge "1")
Out of specification
axle.
Main axle runout limit
0.08 mm (0.0031 in)
2. Measure:
• Drive axle runout
(with a centering device and dial gauge "1")
Out of specification
axle.
Main axle runout limit
0.08 mm (0.0031 in)
5-73
TRANSMISSION
Replace the main
Replace the drive