Yamaha MT-03 Service Manual page 134

2. Check:
• Front brake discs
Refer to "CHECKING THE FRONT BRAKE
DISCS" on page 4-23.
3. Lubricate:
• Oil seal lips
• Collars
Recommended lubricant
Lithium-soap-based grease
4. Install:
• Front wheel
NOTE:
Install the tire and wheel with the mark "1"
pointing in the direction of wheel rotation.
5. Tighten:
• Front wheel axle
Front wheel axle
72 Nm (7.2 m·kg, 52 ft·lb)
• Front wheel axle pinch bolt
Front wheel axle pinch bolt
14 Nm (1.4 m·kg, 10 ft·lb)
EC5YU1002
CAUTION:
Before tightening the wheel axle, push
down hard on the handlebar several times
and check if the front fork rebounds
smoothly.
6. Install:
• Front brake calipers
Front brake caliper bolt
40 Nm (4.0 m·kg, 29 ft·lb)
EWA13500
WARNING
Make sure the brake hose is routed
properly.
NOTE:
Make sure that there is enough space between
the brake pads before installing the brake cali-
pers onto the brake discs.
4-11
FRONT WHEEL