Fuel Tank; Removing The Fuel Tank; Removing The Fuel Pump - Yamaha MT-03 Service Manual

Hide thumbs Also See for MT-03:
Table of Contents

Advertisement

REMOVING THE FUEL TANK

1. Extract the fuel in the fuel tank through the
fuel tank cap with a pump.
2. Remove:
• Seats
Refer to "GENERAL CHASSIS" on page
4-1.
• Bolts "1"
• Panels "2" (right and left)
1
3. Remove:
• Fuel tank rear bolt "3"
3
4. Remove:
• Fuel tank front bolts "4"
5. Remove:
• Fuel hose clamps "5"
6. Disconnect:
• Overflow pipes "6"
• Fuel hose "7"
• Fuel pump coupler "8"
• Fuel sender coupler "9"
5
EC5YU1029
CAUTION:
Although the fuel has been removed from
2
the fuel tank be careful when removing the
fuel hoses, since there may be fuel remain-
ing in them.
NOTE:
• If Remove the fuel hose manually without us-
ing any tools.
• Before removing the hoses, place a few rags
in the area under where they will be removed.
7. Remove:

• Fuel tank

NOTE:
Do not set the fuel tank down on the installation
surface of the fuel pump. Be sure to lean the fu-
el tank against a wall or the like.

REMOVING THE FUEL PUMP

1. Remove:
• Fuel pump
CAUTION:
• Do not drop the fuel pump or give it a
strong shock.
• Do not touch the base section of the fuel
sender.
7-2
FUEL TANK
9
8
5
6
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mt-03 2006

Table of Contents