Yamaha MT-03 Service Manual page 175

5. Install:
• Oil seal "1"
(with the fork seal driver weight and fork seal
driver attachment)
CAUTION:
Make sure the numbered side of the oil seal
faces up.
NOTE:
• Before installing the oil seal, lubricate its lips
with lithium-soap-based grease.
• Lubricate the outer surface of the inner tube
with fork oil.
• Before installing the oil seal, cover the top of
the front fork leg with a plastic bag "2" to pro-
tect the oil seal during installation.
6. Install:
• Oil seal clip "1"
NOTE:
Adjust the oil seal clip so that it fits into the out-
er tube's groove.
7. Install:
• Dust seal "1"
(with the fork seal driver weight)
Fork seal driver weight
90890-01367
8. Fill:
• Front fork leg
(with the specified amount of the recom-
mended fork oil)
Quantity (each front fork leg)
570.0 cm
(20.06 Imp.oz)
Recommended oil
Fork oil 10W or equivalent
CAUTION:
• Be sure to use the recommended fork oil.
Other oils may have an adverse effect on
front fork performance.
• When disassembling and assembling the
front fork leg, do not allow any foreign ma-
terial to enter the front fork.
4-52
FRONT FORK
3 (19.27 US oz)