CAUTION:
Before installing and torquing the crank-
case bolts, be sure to check whether the
transmission is functioning properly by
manually rotating the shift drum in both
directions.
7. Install:
• Lead holder "1"
• Crankcase bolts
å Left crankcase
∫ Right crankcase
A
B
8. Tighten:
• Crankcase bolts
(follow the proper tightening sequence)
Crankcase bolts
10 Nm (1.0 m·kg, 7.2 ft·lb)
NOTE:
Tighten the bolts in stages, using a crisscross
pattern.
9. Apply:
• 4-stroke engine oil
(to the crankshaft pin, bearing, and oil deliv-
ery hole)
10.Check:
• Crankshaft and transmission operation
Unsmooth operation
1
Repair.
5-66
11.Install:
• Speed sensor
Speed sensor bolts
10 Nm (1.0 m·kg, 7.2 ft·lb)
• Neutral switch
• Neutral switch screw
Neutral switch screw
4 Nm (0.4 m·kg, 2.9 ft·lb)
LOCTITE
CRANKCASE
®