Yamaha MT-03 Service Manual page 14

Odometer, tripmeter modes
1
1. "SELECT" button
2. "RESET" button
Pushing the "SELECT" button switches the dis-
play between the odometer mode "ODO" and
the tripmeter modes "TRIP 1" and "TRIP 2" in
the following order:
ODO TRIP 1 TRIP 2
6 6
If the fuel level warning light comes on, the
odometer display will automatically change to
the fuel reserve tripmeter mode "F-TRIP" and
start counting the distance traveled from that
point. In that case, push the "SELECT" button
to switch the display between the various trip-
meter, odometer modes in the following order:
F-TRIP ODO TRIP 1
6 6
To reset a tripmeter, select it by pushing the "SE-
LECT" button, and then push the "RESET" button
for at least four seconds. If you do not reset the
fuel reserve tripmeter manually, it will reset itself
automatically and the display will return to the pri-
or mode after refueling and traveling 5 km (3 mi).
2
ODO
6
TRIP 2 F-TRIP
6 6
1-5
Clock mode
2
1. Clock
2. "SELECT" button
3. "RESET" button
Turn the key to "ON".
To set the clock
1. Push the "SELECT" button for at least two
seconds.
2. When the hour digits start flashing, push the
"RESET" button to set the hours.
3. Push the "SELECT" button, and the minute
digits will start flashing.
4. Push the "RESET" button to set the minutes.
5. Push the "SELECT" button, and then re-
lease it to start the clock.
FEATURES
1
3