Tektronix PHASER 560 Service Manual page 63

Downloaded from www.Manualslib.com
7. The Finish Installation dialog box contains instructions for
completing the printer software setup; click Next.
8.
In the Installation Completed dialog box, click Finish.
9.
Go on to the setup instructions.
Tektronix Driver for Windows 3.1: Setup instructions
If you selected Easy Installation, or if you selected the Tektronix Driver for Windows
3.1 in the Custom Installation, continue with the following instructions:
1. Open the Windows Control Panel.
2. Open the Printers dialog box.
3. Under Installed Printers, select the Phaser 560 printer, click Connect:
Tektronix Phaser 560 Extended
(Extended Features option)
Tektronix Phaser 560
(standard printer configuration)
4. Select the printer's port, click OK.
AdobePS 3 Driver for Windows 3.1: Setup instructions
If you selected the AdobePS 3 Driver for Windows 3.1 in the Custom Installation,
continue with the following instructions:
1. In the Adobe installer, click Read or Skip in the README.WRI dialog box to start the
installation.
2. Click Continue in the PostScript Printer Driver Setup dialog box. Files are copied to
the computer.
3. Click the Restart Windows button in the dialog box that appears.
4. After Windows restarts, the Install PostScript Printer from PPD dialog box opens.
Select the printer in the list and click Install:
Tektronix Phaser 560 Extended
(Extended Features option)
Tektronix Phaser 560
(standard printer configuration)
5. Click OK in the next dialog box.
6. Click Close in the Install PostScript Printer from PPD dialog box.
7. Click OK in the information dialog box.
8. In the Control Panel, double-click Printers.
9. In the Printers dialog box, select the printer you just installed, and click Connect.
10. In the Connect dialog box, select the port the printer is connected to, and click OK.
manuals search engine
Installing the Printer and Drivers
Service Manual
2
2-31