Customer-Replaceable Consumables; Consumables; Imaging Unit; Toner Cartridges - Tektronix PHASER 560 Service Manual

4
Key Operator Training

Customer-replaceable consumables

Consumables page

Imaging unit

Toner cartridges

Transfer roller

4-4 Phaser 560 Color Printer
Downloaded from www.Manualslib.com
Demonstrate how to print out the printer's consumable page which
indicates the usage and remaining life of the printers imaging unit,
toner cartridges, transfer kit, fuser and fuser roll. Show how this is
represented as "fuel" gauges for each consumable.
Explain to customers how to install an imaging unit.
Demonstrate how to properly handle an imaging unit. Emphasize
that they should never touch the green photoconductive belt or the
black accumulator belt underneath.
Warn them about the imaging unit's sensitivity to light. Exposing the
imaging unit to a little as 5 minutes of office lighting will greatly shorten the
life of the imaging unit. The imaging unit should always be covered when
removed from the printer. NEVER expose it to direct sunlight.
Explain to customers how to install a toner cartridge. Explain that
changing a toner cartridge before the printer indicates a "toner low"
message results in incorrect toner "fuel" gauge readings.
Demonstrate how to properly handle a toner cartridge. Emphasize
that they should never touch the developer roller.
Show customers the proper way to store and transport toner
cartridges; the cartridges should always remain in a flat position (as if
installed in the printer).
Demonstrate to customers how to properly handle the transfer
roller/waste toner bin; only handle the roller by its blue-colored
handles. Don't touch the roller. Also , d on't touch end of the roller shaft, it
is coated with an electrically-conductive grease.
Explain to the customer how to remove and install the transfer roller.
manuals search engine