Figure 8-8 Removing The Laser Scanner - Tektronix PHASER 560 Service Manual

8
FRU Disassembly/Assembly
Laser scanner
8-14 Phaser 560 Color Printer
Downloaded from www.Manualslib.com
1.
Remove the top cover as explained in topic, "Top cover" on page 8-2.
2. Disconnect the four wiring harnesses connected to the laser scanner.
3. Remove the three screws securing the laser scanner in place. Lift and
remove the laser scanner.
4. Remove the EMI shield as detailed in the earlier procedure "EMI
shields" on page 8-6.
5.
Disconnect the laser scanner's wiring harness from connector CN4 of
the engine control board.
Note Cover the laser window slot leading to the imaging unit to protect the
photoconductive belt from room light.
Disconnect wiring
harnesses
these two
rnesses to
possible

Figure 8-8 Removing the laser scanner

manuals search engine
Remove three
screws
Laser
scanner
9697-12