Tektronix PHASER 560 Service Manual page 50

2
Installing the Printer and Drivers
Table 2-1 Configuration page settings for the Phaser 560 (cont'd.)
Parameter
Connection
State
Early Token
Release
Firmware
Version
Printer type
Zone
Network Node
NetWare port
interpreter
Print Server
Name
Configuration
file server
Login Password Indicates whether or not a network
Queue Scan
rate
Network
Address
Ethernet Frame
Type
TCP/IP port
interpreter
RARP/BOOTP
IP Address
Network Mask
2-18 Phaser 560 Color Printer
Downloaded from www.Manualslib.com
Description
Indicated if the printer is connected or
inserted into the token ring.
The printer releases the token at the end
of the last byte transmitted (not
applicable a 4 Mbps).
Firmware version of the printer's Token
Ring network card.
Indicates the type of printer installed at
the port.
Name assigned by network
administrator for the zone the printer is
assigned to.
Indicates the Token Ring address of the
printer on the network.
Indicates the type of interpreters in use
at the port.
Name of printer server.
Name of the configuring file server.
password has been set.
Rate at which printer will scan queue for
print jobs.
Printer address and node on the
Ethernet network.
How IPX packets are transmitted over
the network.
Indicates the type of interpreter in use at
the port.
Reverse Address Resolution
Protocol/Boot Parameter Protocol. Used
for setting the printer's IP address from a
boot server.
The Internet Protocol address. If null,
the address will be set at run time via
RARP or BOOTP.
Indicates which fields of the IP Address
designate the network portion and which
designate the node portion. If null, the
mask will be determined from the
printer's IP address or the BOOTP or
ICMP Netmask Reply.
manuals search engine
Saved Default Limits or alternate choices
in
NVRAM
yes Inserted No Cable, Cable connected,
Removed, Duplicated Address
yes On Off
X.XX
yes
LaserWriter Any string, 32 character or
less
yes * Any string, 32 characters or
less
yes 0 Integer assigned by network
yes Auto Select Disabled, <interpreter>
user-defined
yes TEK01B009,
hardware
dependant
yes null string user-defined
yes Not set Set, Not set
yes 15 seconds An integer 1 through 300 in
seconds
yes null string An 8 digit hex number
00000001 through FFFFFFFE
yes Adaptive 802.3-X, DIX, 802.3-2,
802.3-2-SNAP
yes Not authorized, Disabled
yes False True
yes Not Set String of 15 or fewer
characters of the format
N.N.N.N followed by the word
"Dynamic" if IP Address
Dynamic parameter is set to
true.
yes Default String of 15 or fewer
characters of the format
N.N.N.N